SRM-3020 MAINTENANCE
X7502350002 41
© 2/20 ECHO Incorporated
4. Hold trimmer head while
turning knob clockwise to wind
line onto spool until about
13 cm (5 in.) of each line
remains exposed.
Trimmer head is now fully loaded
and ready for operation.
When the wear indicators
located at the bottom of the
Speed-Feed
®
head are worn
smooth, or if holes appear,
replacement of the cover or the
entire Speed-Feed
®
head is
required.
HDFH line head requires no maintenance.
To Next Page
Loading...
