66
SRM-360SL
E
N
G
L
I
S
H
D
E
U
T
S
C
H
I
T
A
L
I
A
N
O
SRM-360SL
LU
Mass :
unit without cutting attachment, empty tank kg 6.9 7.5
unit with specified cutting attachment, empty tank kg 7.8 8.6
unit with specified cutting attachment, full tank kg 8.5 9.3
Volume :
fuel tank L 0.74
oil tank L 0.21
Cutting attachment :
nylon line head Z5 -
line diameter mm 3.0 -
line length m 5 × 1 line -
thread Left-handed M10 × 1.25 -
specified blade diameter mm - 255
specified blade thickness mm - 3.0
number of cutting teeth - 3
blade centre hole diameter mm - 25.4
blade rotational speed at maximum allowable
engine speed r/min - 10000
Gear ratio : gear ratio and lubrication 1.33 reduction and good quality lithium grease
Rotational direction of output shaft seen
from above : Anticlockwise
External dimensions :
length mm 1834 1834
width mm 360 720
height mm 350 455
Engine :
type Air cooled two stroke single cylinder
engine displacement mL(cm³) 34.3
maximum shaft brake power, measured in
accordance with ISO 8893 kW 1.00
engine speed at maximum engine power r/min 7000
recommended maximum engine speed r/min 9800 10000
output shaft speed r/min -
recommended engine idling speed r/min 2600
carburettor Diaphragm type
ignition Flywheel magneto - TCI system
spark plug NGK BPMR7A
starter Recoil starter
clutch Automatic centrifugal clutch
Fuel :
petrol Regular grade petrol. Minimum 89 Octane
unleaded petrol is recommended. Do not use fuel
containing methyl alcohol or more than 10 % of
ethyl alcohol.
lubrication oil Air cooled two stroke engine oil of a reputable brand
name
fuel consumption at maximum engine power L/h 0.71
specific fuel consumption at maximum engine
power g/(kW·h) 659
Sound pressure level : (ISO 22868) LpAav = dB(A) 92.3 90.8
Guaranteed sound power level :
(2000/14/EC) L
WA dB(A) 110 106
Vibration levels : (ISO 22867)
m/s² Front handle 5.5 Left handle 2.6
m/s² Rear handle 6.6
Right handle 2.3
SPECIFICATIONS
GB
Specifications, descriptions and illustrative material in
this literature are as accurate as known at the time of
publication, but are subject to change without notice.
Illustrations may include optional equipment and
accessories, and may not include all standard
equipment.
To Next Page
Loading...
