ENGLISH
• NEVER operate
a Power Pruner
Attachment while on
a ladder, in a tree, or
on slippery or unstable
surfaces.
• ALWAYS make sure
that the pruned tree
branch or limb can fall
safely to the ground
after cutting.
• NEVER stand under
a tree limb or branch
during cutting
• ALWAYS keep guide
bar cover on guide bar
until unit is ready to be used.
• ALWAYS keep chain properly tensioned
• NEVER make guide bar/saw chain adjustments while unit is running. Stop
engine and disconnect spark plug lead before tensioning chain.
• ALWAYS keep saw chain sharp. Dull chain will cause increased vibration
and premature guide bar and chain failure.
• ALWAYS use only to cut wood. Cutting any other type of material can
cause increased risk of kickback and damage to saw chain and guide bar.
• ALWAYS stop engine immediately and check chain and guide bar for
damage if the cutting attachment strikes an obstacle during cutting.
• NEVER use a saw chain with missing or damaged teeth. Excessive
vibration and erratic operation can cause chain failure and serious injury.
PAS PROPADDLE/PROSWEEP ATTACHMENT
Misuse, improper assembly, or use of unapproved
attachments, can result in serious injury, engine
failure, and voiding of warranty. Use only attachments
approved for use on Pro Attachment Series models.
Contact with moving work attachments can cause
entanglement and serious injury. Keep clear of moving
work attachment.
• ALWAYS keep hands and feet away from moving
work attachment.
• ALWAYS allow attachment to come to a complete
stop before handling.
• ALWAYS keep attachment far enough away from
your body to prevent entanglement with rotating
parts.
Keep chain properly tensioned
To Next Page
Loading...
Need help?
General
