Echo SRM series User Manual

ENGLISH
WARNING
Operating a poorly maintained unit can result in serious injuries to
operator and others. Maintain unit as instructed in Operator’s Man-
ual. Keep blades sharp and properly adjusted, and replace broken
parts immediately.
Moving parts can amputate ngers or cause severe injuries. Keep
hands, clothing and loose objects away from all openings. Always
stop engine, disconnect spark plug, and make sure all moving parts
have come to a complete stop before removing obstructions, clear-
ing debris, or servicing unit.
Your unit requires regular maintenance for safe operation and reli-
able performance. Using a poorly-maintained unit can result in an
injury caused by a part failure or other malfunction. Follow these
important safety instructions to reduce the risk of injury caused by
poor maintenance.
• NEVER test for ignition spark by grounding spark plug near cylinder plug
hole. A spark could ignite fuel vapor, causing serious injury from explosion
or re.
• NEVER use a unit with broken, damaged, missing, or worn parts. Contact
your dealer for repairs if problems are found.
• NEVER use substitute parts, parts from other models or brands, or used
parts, when performing maintenance or repairs. Use only new parts that are
manufactured for your specic serial number and model trimmer.
• NEVER make temporary repairs on a unit - taking shortcuts or using
questionable parts and performing repairs that are not approved may create
a safety hazard that can cause serious injury. Improper repair may also
cause premature part failures, and void your product warranty.
• ALWAYS keep blades sharp. Cutting with dull blades increases the
chances of jams and binding, reduces cutting efciency, and increases
operator fatigue.
• ALWAYS keep hedge clipper blades properly adjusted. Improperly adjusted
blades may result in poor cutting performance, increased risk of jams, and
premature blade wear or failure.
• ALWAYS keep blades and gear case properly lubricated. Poor lubrication
can cause result in part failures and cause overheating.
• ALWAYS keep fasteners tightened securely, and use the correct tools for
the job. Operation with loose fasteners can result in hazardous operation.
• ALWAYS do a safety check after performing any service or maintenance on
the unit. Make sure all parts have been properly installed, all hardware is
properly tightened, and all guards and shields are in place.
• NEVER reach into any opening while the engine is running. Moving parts
may not be visible through openings.
• ALWAYS stop unit immediately and correct any problem if unit does not run
properly after performing service or maintenance. Operating a unit that has
been improperly repaired may result in serious injury.
• ALWAYS have major service performed by a qualied service technician.
See your dealer for authorized service support.
44
MAINTENANCE

Echo SRM series Specifications

General

Type	String Trimmer
Engine Type	2-Stroke
Engine Displacement	21.2 cc
Fuel Tank Capacity	14.9 oz
Cutting Height Adjustment	N/A (fixed line length)