Echo SRM series User Manual

ENGLISH
SRM/PAS/SB SET-UP GUIDE*
To Use These
Blades
Pro Maxi-
Cut Grass/
Weed
Plastic
Cutters
Rigid
Plastic Tri-
Cut Grass/
Weed Blade
Metal Tri-
Cut/8 Tooth
Grass/
Weed
Blade
Metal 80T
Brush Blade
Metal 22T
Clearing
Saw Blade
You
must
install
these
parts
Handle
Loop
Handle,
w/or w/o
Barrier Bar
Loop
Handle w/
Barrier Bar,
or U-Handle
Loop
Handle w/
Barrier Bar,
or U-Handle
U-Handle
Debris
Shield
Metal
Shield
Metal Shield Metal Shield Metal Shield
Harness
Shoulder
Harness
Shoulder
Harness
Shoulder
Harness
Shoulder
Harness****
Blade
Mounting
Hardware
Upper
Plate & Flat
Washer
Upper Plate
& Glide Cup
Upper/
Lower Blade
Plates**
Upper/
Lower Blade
Plates**
Hex Nut Hex Nut Hex Nut Hex Nut
New Cotter
Pin***
New Cotter
Pin***
New Cotter
Pin***
New Cotter
Pin***
* WARNING! DO NOT INSTALL BLADES ON GT (CURVED SHAFT MODEL
TRIMMERS
** Arbor diameter of Upper Blade must match arbor diameter of metal blades.
*** New cotter pin required each time blade is installed.
**** Brushcutters over 16.5 lbs (7.5 kg) dry weight (weight w/o fuel) require a
double harness
PE MODELS
DANGER
Modication, improper assembly, or use of unap-
proved blades or attachments, can result in seri-
ous injury, engine failure, and voiding of warranty.
Use only blades and attachments approved for use
on PE Series power edger models.
Assemble unit only as instructed in Operator’s Manual,
using parts provided with unit.
• NEVER modify edger or install
blades or attachments not approved
by for use on model PE power
edgers.
• NEVER remove debris shield or
deector ap.
• NEVER install grass, weed, clearing,
brushcutter, or any other type of
circular metal saw blades or cutting
attachment on an edger.
Keep Hands/
Feet Away From
Edger Blade
PE
POWER
EDGER
17
ASSEMBLY

Echo SRM series Specifications

General

Type	String Trimmer
Engine Type	2-Stroke
Engine Displacement	21.2 cc
Fuel Tank Capacity	14.9 oz
Cutting Height Adjustment	N/A (fixed line length)