EasyManua.ls Logo

Echo TC-2100 - OPERATION; STARTING COLD ENGINE

Echo TC-2100
28 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
14
OPERATION
- Provide all operators of this equipment with the Operator's Manual
and instructions for safe operation.
- Before starting the unit, equip yourself and any other person
working within the 15M (50 ft.) Safety Zone with the required
Protective Equipment and clothing.
- During operation, the complete unit, especially the engine and the
gear housing may become very hot, too hot to touch. Avoid
contact during and immediately after operation.
- Do not operate this product indoors or in inadequately ventilated
areas.
STARTING COLD ENGINE
WARNING DANGER
The tines should not move at idle. If tines move, readjust carbure-
tor according to "Carburetor Adjustment" instructions in this
manual or see your ECHO Dealer, otherwise serious personal injury
may result.
1. STOP SWITCH - START.
Move Stop Switch (A) to START position.
2. CLOSE CHOKE - COLD START.
Move choke (B) to START (closed) position. Throttle must remain
at idle for starting.
3. PRIMER - PUMP BULB.
Pump primer bulb (C) 10 times, until fuel is visible in the “Clear”
fuel return line.
B
C

Related product manuals