OPERATION HCS-2810 / 3810
20 X7702248300
© 09/19 ECHO Incorporated
1. Stop Switch
Move stop switch (A) away from
the STOP position.
2. Choke
Move choke (B) to COLD
START ( ) (CLOSED)
position.
3. Purge Bulb
Pump purge bulb (C) until fuel is
visible and flows freely in the
clear fuel tank return line. Pump
bulb an additional 4 or 5 times.
4. Recoil Starter
Lay the unit on a flat, clear area.
Grip the support handle (D)
securely with right hand, and
pull the recoil starter handle (E)
with left hand until engine fires
(or 5 pulls maximum).
To Next Page
Loading...
Need help?
General