Need help?Do you have a question about the EchoStar DSB-2110 2Ci Viaccess and is the answer not in the manual?
General| Type | Digital Satellite Receiver |
|---|---|
| Demodulation | QPSK |
| Aspect Ratio | 4:3, 16:9 |
| USB Port | No |
| Ethernet | No |
| Smart Card Slot | Yes |
| Conditional Access | Viaccess |
| Weight | 1.2 kg |
| Input Frequency Range | 950 MHz to 2150 MHz |
| Symbol Rate | 2~45Msps |
| DiSEqC | 1.0 |
| Video Decoding | MPEG-2 |
| Audio Decoding | MPEG Layer I & II |
| Video Resolution | 720 x 576 |
| Output Connectors | RCA (CVBS |
| Power Supply | 50/60Hz |
| Power Consumption | Max 25 W |
Explanation of the functions of each button on the remote control unit.
Guide for connecting the satellite receiver to a TV using RF cable.
Steps to connect the receiver, VCR, and TV using RF connections.
Instructions for connecting the receiver to a TV using RCA audio and video cables.
Procedure for connecting the receiver to a TV and VCR using SCART cables.
Initial setup and configuration of the receiver and its connection to the TV.
Configuration for DiSEqC 1.2 positioners to manage multiple satellite dishes.
Accessing and navigating through the main menu options of the receiver.
Setting up installation locks and managing the PIN code for security.
Aligning the satellite dish and searching for channels on selected satellites.
Automatically scanning for and storing all available TV and radio channels.
Adding or deleting transponder information for satellite channel scanning.
Adding or deleting satellite entries to the receiver's database.
To Next Page
