What to do if there is no picture or sound in the TV or radio mode on my EchoStar DSB-707 FTA Receiver?
If there is no picture or sound in TV or radio mode, make sure the receiver is switched on and not in standby. Check the cable connections and make any necessary adjustments. Also, ensure the dish and LNB are correctly adjusted.
What to do if my television shows a No Signal message from EchoStar DSB-707 FTA?
If your television displays a 'No Signal' message, ensure the selected channel is transmitting. Also, verify that the correct dish or LNB is selected and that the dish and LNB are clean and correctly adjusted.
How to fix bad picture or noisy sound in TV or radio mode on EchoStar DSB-707 FTA Receiver?
If you are experiencing bad picture or noisy sound, ensure the dish and LNB are clean and correctly adjusted. Check the UHF settings and ensure you are using the correct channel. Please refer to the TV/radio user guide for more information.
What to do if my television does not receive any signal from the EchoStar Receiver?
If your television isn't receiving a signal from the receiver, ensure you've selected the correct A/V channel on your TV. Also, verify that you are using a full featured and correctly shielded SCART cable.
Why does my EchoStar DSB-707 FTA sometimes not respond to the RCU?
If the receiver sometimes doesn't respond to the RCU, it could be due to direct sunlight from behind the receiver. Try closing the sun blinds or getting closer to the receiver. Ensure you aim sufficiently at the receiver display. Also, the batteries might be almost empty, so try inserting new batteries.
How to fix the issue when during setup of EchoStar DSB-707 FTA, no channels are found?
If no channels are found during the initial setup, ensure you've selected the correct LNB(F) in the installation setup menu. If installed, verify you've selected the correct switch type or port in the installation setup menu. Ensure you've selected the correct satellite to search channels on, and always choose the option 'All' at an initial setup for the search method.
What to do if nothing appears on the EchoStar DSB-707 FTA Receiver display?
If nothing appears on the receiver display, check the main power cord and ensure it is properly inserted into the wall socket. Also, check the domestic power supply and insert a new fuse if necessary.
How to fix the issue when my television shows black areas on the left and right of the screen with EchoStar Receiver?
If your television shows black areas on the left and right of the screen, select the correct aspect ratio for your TV in the user profile menu on the receiver.
What to do if I cannot find a channel which should be there on my EchoStar DSB-707 FTA Receiver?
If you cannot find a channel, check the 'all channels' list and select the correct (favorite) list. The channel might also be hidden, so try unhiding it.
How to fix an empty EPG on EchoStar DSB-707 FTA Receiver?
If the EPG is empty, you may have selected an empty (favorites) list; select another (favorites) list. If the selected program supports no EPG there is no solution for this. Also, the local time may not be correct; in the Local Time menu, set the correct time.
Provides essential safety guidelines for operating the satellite receiver to prevent injury or equipment damage.
Outlines precautions for connecting and using the receiver to prevent electrical shock or fire hazards.
Provides essential instructions for safely positioning and setting up the receiver.
Guides users on connecting various audio-visual equipment to the satellite receiver.
Explains the procedure for connecting the satellite dish to the receiver using RF coaxial cables.
A step-by-step walkthrough for the initial configuration of the receiver upon first use.
Details how to access and use the electronic program guide for channel information.
Instructions on viewing program schedules, selecting programs, and accessing detailed information.
Details the process for updating the receiver's software via satellite or serial port.
General troubleshooting section to help users diagnose and resolve issues with the receiver.
Provides essential safety guidelines for operating the satellite receiver to prevent injury or equipment damage.
Outlines precautions for connecting and using the receiver to prevent electrical shock or fire hazards.
Provides essential instructions for safely positioning and setting up the receiver.
Guides users on connecting various audio-visual equipment to the satellite receiver.
Explains the procedure for connecting the satellite dish to the receiver using RF coaxial cables.
A step-by-step walkthrough for the initial configuration of the receiver upon first use.
Details how to access and use the electronic program guide for channel information.
Instructions on viewing program schedules, selecting programs, and accessing detailed information.
Details the process for updating the receiver's software via satellite or serial port.
General troubleshooting section to help users diagnose and resolve issues with the receiver.
To Next Page
General
