Need help?Do you have a question about the EchoStar DSB-1100 and is the answer not in the manual?
General| Type | Digital Satellite Receiver |
|---|---|
| Supported Formats | MPEG-2 |
| Supported Satellite Systems | DVB-S |
| Input Frequency Range | 950-2150 MHz |
| Audio Output | Stereo |
| Output | RF |
| Weight | 1.2 kg |
| Audio Outputs | RCA |
| Video Outputs | Composite |
| LNB Power Supply | 13/18V |
| DiSEqC Compatibility | DiSEqC 1.2 |
| Video Output | Composite |
| Power Supply | 220-240V AC, 50Hz Internal |
| Input | Satellite Dish Input (F-connector) |
Overview of the front panel controls and indicators.
Details of the rear panel connections and ports.
Step-by-step guide for connecting the receiver to a TV using RF.
Connecting receiver, VCR, and TV using RF cables.
Connecting receiver and TV using RCA audio/video cables.
Connecting receiver, VCR, and TV using SCART cables.
Initial setup of the receiver with the TV.
Customizing receiver settings like language and time.
Configuring subtitle display options.
Navigating through the receiver's main menu options.
Accessing and managing installation settings.
Searching and storing satellite channels.
Editing or adding satellite and transponder data.
Adjusting local frequencies for LNB settings.
Restoring receiver settings to factory defaults.
Details on tuner input, frequency range, and MPEG decoding.
Information on internal memory and power requirements.
Specifications for audio/video, data interfaces, and RF modulator.
Device dimensions, weight, and operating conditions.
To Next Page
