11
Installation
B. Main menu and Installation
Press the MENU key to display the “Main Menu” o
n the screen.
Main Menu
Select a sub-menu using the , keys or the numeric k
eys. Please note that the OK key is always a confirma
tion of your selection. To go back to the previous me
nu, press the MENU key.
The Installation, “Enter PIN code” Menu is displayed only when the Installation&Edit Lock is set as [O
N]. The initial code is set as [0000] but you can change it (See “Change PIN code” on page 13).
Program Satellites
If you are unable to get any signal quality, please check the LNB Setting to ensure you have selected the corr
ect LNB and switch settings.
This menu is to align your dish to the selected satellite.
After setting the parameters, press the OK key to store th
e parameter values. And Start Search(Press OK) to searc
h the channels of transponder you want.
Refer to the Signal Quality bar and the Signal Lev
el bar at the bottom of the screen. It is recommend
ed that the signal is at the Medium level or higher.
If it is not , please adjust your satellite dish.
Main Menu
TV Channels
Radio Channels
Parental Control
Edit
Installation
Select Satellite
3
2
4
5
6
Exit
i
1
Enter PIN Code
[ ? ? ? ?]
Installation Lock
Installation
SMATV Configuration
User’s Setting
LNB Setting
Program Satellites
1
4
3
5 Advanced Installation
2
Exit
i
8
7
Program Satellite
Satellite 028.2° E
LNB Type Type1
TP/Polar 11478/H
Symbol Rate 30000
Position
Step Move E W
Search type Auto Search
Start Search(Press OK)
2
3
4
Set
Signal Level
Signal Quality
6
52%
63%
× ASTRA2 Ø
5
i
1
8
7 Conditional Access
To Next Page
Loading...
