EchoStar DSB-1100 - Getting Started and Connections; Connecting Receiver to TV via RF; Connecting Receiver, VCR, and TV via RF

ANT IN
TV OUT
VIDEO
AUDIO
(400mA Max.)
ANT IN
TV OUT
VIDEO
AUDIO
(400mA Max.)
DO NOT PLUG the receiver into Main Power Outlet, until you complete all the connections to the receiver.
DO NOT PLUG the receiver into Main Power Outlet, until you complete all the connections to the receiver.
5. Getting Started
TV ANTENNA
TV
RF IN
6
Receiver to TV with RF
VCR
TV
RF IN
RF IN
RF OUT
Receiver to VCR and then to TV with RF
1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-1100 Viaccess.
2. Connect the TV OUT socket of the EchoStar DSB-1100 Viaccess to the RF IN of the TV set.
3. Search on the TV set for UHF channel # 38. This is the default channel where the EchoStar DSB-1100 Viaccess is set to.
1. Connect the Off-air TV antenna or cable if available to the ANT IN socket of the EchoStar DSB-1100 Viaccess.
2. Connect the TV OUT socket of the EchoStar DSB-1100 Viaccess with the RF IN of the VCR.
3. Connect the RF OUT of the VCR to the RF IN of the TV set.
4. Search on the TV set and the VCR for UHF channel # 38. This is the default channel where the EchoStar DSB-1100 Viaccess
is programmed to.
Note : Use different UHF channels for VCR and EchoStar DSB-1100 Viaccess.
TV ANTENNA