17
High Pass Filter
A filter that attenuates low frequency components of a signal. “Manual” High Pass Filter should be manipulated with
a 100% WET MIX: placing the mixer WET/DRY crossfader (25) on “WET”.
The user can manually move the filter “cut-off” frequency and mix for example a new track “opening” the filter
(PARAMETER “000”->”100”) which will “fade-in” the sound from high to bass frequencies!
TIME
PARAMETER
High Pass Filter
---
(Manual)
High Pass filter cut-off
frequency from
“bypass” (0%) to 20 kHz (100%)
Delay
Delays “in-beat” one or more of the output signals by a controllable amount called «Feedback». You can mix the
delay sounds in synchronization with the beat. The amount of delay feedback will increase sound reflections and
transform your Delay (one sound repeated) into Echo (multiple sounds repeated).
You can “Beat Transform” your mix adjusting the Delay Time: for example if you mix the original sound and the
delayed sound with a 1-2 (1/2 beat ) Delay Time, and you will “double” the music rhythm.
TIME
PARAMETER
Delay
Delay Time
from ¼ to 4 beats
Feedback %
To Next Page
Loading...
