Ecleris EVERLUX User Manual (English)

Questions and Answers:

N
Nicholas CampbellAug 10, 2025
How to troubleshoot if Ecleris Medical Equipment does not turn on?
- C
  Crystal StevensAug 10, 2025
  If your Ecleris Medical Equipment isn't turning on, start by ensuring the power supply cable is securely connected to the electrical network. If it's already connected, inspect the cable for any signs of damage like cuts or breaks, and replace it if necessary. Also, check the plug for any damage and replace if needed. Finally, check the fuse and replace it if it is broken or burnt.
C
Christina MooreAug 15, 2025
Why is the image too dark on my Ecleris Medical Equipment?
- K
  Kimberly SchmidtAug 15, 2025
  If the image is too dark on your Ecleris Medical Equipment, first, adjust the dimmer by turning it clockwise and also ensure the fiber optic cable is correctly placed and in good condition. If the issue persists, check the monitor's color, brightness, and saturation levels, ensuring you've performed a white balance beforehand.
J
Jill BlankenshipAug 20, 2025
What to do if light is correct but no image appears on the monitor of Ecleris Medical Equipment?
- S
  Sierra NicholsAug 20, 2025
  If the light is correct but no image appears on the monitor when connecting the video camera to your Ecleris Medical Equipment, first check the video cable for any cuts or disconnections and ensure it is properly connected to the monitor; replace the cable if necessary. If the issue persists, try replacing the video camera to rule out a defective camera. Lastly, make sure that the monitor is correctly programmed by selecting the corresponding video input and standard.
K
Kyle AbbottAug 26, 2025
What to do if my Ecleris Medical Equipment is running at a high temperature?
- M
  Miguel StanleyAug 26, 2025
  If your Ecleris Medical Equipment is running at a high temperature, start by clearing any obstructions from the lateral ventilation grids. If the issue continues, turn the equipment off immediately and contact the closest Technical Service, as the fan may not be working.
R
Robert HendersonAug 30, 2025
Why the LED system of my Ecleris Medical Equipment doesn't turn on?
- C
  christopherchanAug 30, 2025
  If the green pilot light from the on/off switch turns on but the LED system does not on your Ecleris Medical Equipment, clean and clear the lateral ventilation grids. Also, check if the fan is running. If the issue persists, turn the equipment off immediately and contact the closest Technical Service, as the over-temperature LED system protection may be activated, the LED system may be exhausted, or the internal fuse burnt or defective board.
T
Tiffany SchwartzSep 4, 2025
How to adjust the light intensity on Ecleris Medical Equipment?
- V
  Victor GarnerSep 4, 2025
  If the light intensity is not correct on your Ecleris Medical Equipment, first, check the dimmer and turn it clockwise to increase the light intensity. If the issue persists, contact the closest Technical service, as the LED system may be defective.