USER MANUAL – EVERLUX
Page 5 de 11
INMANUUIN167 Rev.2019.04.01 / ENG
3.2 INTENDED USER
The device has been designed to be used only for medical, paramedical or health professionals.
3.3 FEATURES AND DESCRIPTION
EVERLUX light source, based on the LED technology, has been designed to be used in all
ECLERIS microscope and colposcope models as well as in many medical applications.
This light source has a connection for endocamera, video outputs and universal adapter for those
fiber optic models most widely distributed in the market.
It has a LED (Light Emitting Diode) lighting module which produces the necessary light to obtain
video images. The cold, deep and white light of this equipment enhances the real brightness and
colors allowing its use for all types of procedures.
The EVERLUX allows the connection of the Ecleris PROCAM universal endocamera which has a
1/3” CCD sensor and integrated controls, especially designed for medical applications ensuring a
high image quality, precision and resolution.
This endocamera allows the electronic capture of the image, its processing and conversion to
video signal with adequate features for the connection to external devices such as monitors,
video-printers, image capturing systems, etc.
3.3.1 FRONT PANEL
1. ON/OFF switch
2. Light intensity control (Dimmer)
3. Camera connector (video input)
4. Universal fiber optic cable
connector
3.3.2 REAR PANEL
5. Power supply cable connector
with fuse holder
6. Ecleris Endodigi connector
(image and video capture) and
other peripheral devices*
7. S-Video output (SVHS)
8. Composite Video Output
(CVBS)
* Standard output (normally-open) to
remotely opérate other image capture
devices such as Video Printers.
To Next Page
Loading...
