Need help?Do you have a question about the Eclipse Algas-SDI POWER Series and is the answer not in the manual?
General| Brand | Eclipse |
|---|---|
| Model | Algas-SDI POWER Series |
| Category | Vaporizers |
| Language | English |
Explains the function and features of the Power Series vaporizers, including indirect firing and safety devices.
Illustrates and lists major components of the Division 1 models with a top, front, and side view.
Covers general requirements, safety precautions, and testing for installing the vaporizer.
Discusses the necessity and installation of a liquid pump based on vapor pressure requirements.
Details the proper installation of the vapor outlet line, including regulator placement.
Outlines electrical installation standards, wiring, and conduit requirements for the unit.
Guidance on selecting appropriate wire sizes based on unit specifications and code requirements.
Explains how the electric vaporizer's control system functions, including heater core and safety features.
Details the control board components and the brown-out protection feature for power disturbances.
Describes new features for automatic restart and fault indication using an EEPROM memory chip.
Step-by-step instructions for quick and detailed starting procedures for Division 1 models.
Step-by-step instructions for quick starting procedures for Division 2 models.
Procedures for stopping the vaporizer, including extended shutdowns and safety notes.
Provides a schedule for routine maintenance tasks and checks for various components.
Introduces troubleshooting procedures and the use of the built-in 'First-Out' annunciator.
Explains control board test points and the meaning of operation/fault annunciator codes.
Troubleshooting steps for thermocouple faults and high liquid level switch issues.
Step-by-step guide for adjusting the unit's operating temperature settings.
Instructions for testing heater element resistance for proper function.
Steps to diagnose why the power indicator lamp is not illuminating.
Detailed electrical checks for the solenoid valve's functionality.
Steps to test the liquid level switch for proper operation.
Guides for checking thermocouple connections and identifying potential issues.
Procedure to test the automatic restart feature after power interruptions.
Explains the economy operation feature and its benefits for minimizing power usage.
Details about the remote control box and its alarm indicator features.
Describes the optional Filtaire contaminant separator and its operation.
Lists spare parts for single vaporizer units with diagram references.
Bussing diagram for specific capacity ranges and voltages.
To Next Page