Need help?Do you have a question about the Eclipse WX Series and is the answer not in the manual?
Identifies the intended reader for this manual, assuming prior knowledge of nozzle-mix burners.
Lists related documentation such as datasheets and installation guides for comprehensive understanding.
States the manual's objective: ensuring safe, effective, and trouble-free combustion system design.
Provides instructions on contacting an Eclipse representative for assistance or clarification.
Describes the Winnox version 1 burner, its type, applications, and key design features for efficient combustion.
Outlines the operational capabilities and design parameters of the Winnox burner system.
Emphasizes the importance of trained personnel and regular retraining for safe operation and proficiency.
Specifies that only Eclipse-approved parts should be used for maintenance and repairs.
Guides the selection of burner model, fuel type, air supply, and other configuration options for specific applications.
Details the selection criteria for the combustion air blower, including power supply, motor type, and inlet considerations.
Explains the air:gas ratio control and burner control mechanisms used in Winnox burners.
Covers the requirements for the ignition transformer and the trial for ignition process.
Describes the flame sensor types (rod, UV scanner) and flame monitoring control components for system safety.
Details the design considerations for the main gas shut-off valve train, adhering to safety standards.
Addresses the need to verify firing chamber dimensions for low-emission burners like the Winnox.
Provides tables for converting between metric and English units for various engineering parameters.
To Next Page
General
