ECM Giotto - Installation

User’s
manual
Giotto
7
5. Installation
All ECM machines are designed to ensure maximum possible operator safety. It is, however, an
important responsibility of the user to observe the following safety codes to further enhance safe
installation and operation.
e Always ensure that hazardous packing items such as plastic bags, styrofoam, nails, etc. are
properly disposed of to prevent accidental injury to childen or other persons.
e If there is evidence of defect or damage to the machine an authorised ECM dealer or technician
should be notified immediately so that remedial action can be taken..
e This machine is safe only when it has been correctly conncected to an efficient
earthing/grounding system. This should conform to local safety standards and legislation in
force at the time of installation.
e Installation of any ECM product should only be undertaken by duly authorised, properly trained
and qualified personnel
e Dangerous or improper electrical connections are extremely hazardous and should never occur.
e Always check the integrity of the components elements of the machine.
e Never fit defective or damaged spare parts. Always request replacement from ECM.
e Before connecting the machine to electric supply, always check that capacity and power rating
at least equals the power requirement of the machine.
e Protect the operator by fitting a circuit breaker to electric supply feeding the machine.
e Never attempt to tun the machine with water that is harder than 7?F.
This equipment is to be installed to comply with the applicable
Federal, state, or local plumbing codes having jurisdiction.