To Next PageTo Next Page
Need help?Do you have a question about the Eco-Flo SUP54 and is the answer not in the manual?
Provides essential safety guidelines for manual operation, installation, and maintenance, advising users to save instructions for future reference.
Explains the safety alert symbol and various signal words (DANGER, WARNING, CAUTION, NOTICE) used to indicate potential hazards and injury risks.
Details requirements for connecting the pump to the electrical system, emphasizing voltage verification, grounding, and protection from water.
Explains the pump's built-in thermal protection switch that automatically stops and restarts the motor during overload conditions.
Covers issues like no motor sound, humming, no water delivery, or reduced flow, detailing causes like clogs, air locks, and installation errors.
Addresses the problem of the pump running continuously without shutting off, typically due to float switch issues or air locking.
Diagnoses circuit breaker trips, blown fuses, or motor stopping after short operation, pointing to electrical faults or motor defects.
Advises on safety measures before servicing the pump, including shutting off power, unplugging, and using protective gear.
Details the manufacturer's 12-month warranty against defects in material and workmanship, excluding wear and tear and user-caused damage.
Outlines warranty terms, exclusions, limitations of remedies, and legal rights, emphasizing buyer responsibility for labor and shipping.
General| Voltage | 115/230V |
|---|---|
| Construction | Thermoplastic |
| Material | Thermoplastic |
| Horse Power | 0.5 HP |
| Maximum Flow Rate | 540 GPH |
| Flow Rate | 540 GPH |
| Phase | 1 |
