Eco-Flo SUP57 - User Manual

Owner’s Manual
Automatic
Submersible
Utility Pumps
General Safety . . . . . . . . . . . . . . . . . . . . 2
Specications. . . . . . . . . . . . . . . . . . . . . 3
Installation. . . . . . . . . . . . . . . . . . . . . . . .4
Troubleshooting . . . . . . . . . . . . . . . . . . . 5
Warranty . . . . . . . . . . . . . . . . . . . . . . . . 6
TABLE OF CONTENTS

Summary

General Safety

Important Safety Instructions

Key instructions for safe operation and maintenance of the pump.

Safety Labels Explained

Explanation of safety alert symbols and signal words used in the manual.

Operational Safety Precautions

Guidelines on operating the pump safely, including temperature, freezing, and usage restrictions.

Specifications and Performance

Installation and Wiring

General Installation Guidelines

Steps for pump installation, including grounding, voltage, and basin preparation.

Electrical Wire Connection

Proper procedures for connecting the pump's electrical wiring to the power supply.

Overload Protection System

Information on the pump's built-in thermal overload protection system.

Troubleshooting and Precautions

Troubleshooting Pump Issues

Common pump problems and their solutions, including no run, no water, and stopping.

Electrical Precautions During Troubleshooting

Safety measures to take before servicing the pump.

Warranty Information

Eco-Flo SUP57 Specifications

General

Voltage	115 V
Construction	Thermoplastic
Material	Thermoplastic
Horsepower	0.5 HP
Maximum Flow Rate	2550 GPH
Maximum Pumping Height	25 ft
Switch Type	Float switch
Flow Rate	2550 GPH @ 5 ft.
Max Head	25 ft
Power	0.5 HP
Phase	Single