Need help?Do you have a question about the Ecobee 3 smarter wi-fi thermostat and is the answer not in the manual?
General| Display Size | 3.5 inches |
|---|---|
| Sensors | Temperature, humidity, occupancy |
| Display | Full-color LCD |
| Compatibility | Works with most 24V systems |
| Wi-Fi | 802.11 b/g/n |
| Voice Control | Amazon Alexa, Google Assistant, Apple HomeKit |
| Battery Backup | Yes |
| Remote Sensors | Yes, supports up to 32 remote sensors |
| Power | 24VAC |
| Operating Humidity | 5% to 95% RH (non-condensing) |
Displays the home screen when the thermostat is approached. Shows current mode and equipment.
Activates when the thermostat is not in use, showing indoor temp and outdoor weather.
Override scheduled temperature by moving the set-point bubble up or down.
Registers your ecobee3. Menu item disappears after registration.
Selects mode of operation: heat/cool/auto, fan on/off, and any accessory.
Manages sensors and adjusts Smart Home/Away and Follow Me settings.
Manages temperature according to time and day.
Manages temperature for different climate states (Away, Home, Sleep).
Manages thermostat settings for a vacation period.
Displays any reminder or alert messages.
Manages display preferences, Wi-Fi, and equipment operating parameters.
Displays technical information about your thermostat.
Settings depend on system type, showing options like Heat, Cool, or Auto.
Automatically overrides schedule based on occupancy to save energy or maximize comfort.
Uses sensor readings to decide heating/cooling operation for optimal room comfort.
Clean screen with water on a microfiber cloth. Do not spray liquids directly.
Pull thermostat off the back plate gently. Does not alter programming.
Options to reset registration, preferences, or all factory settings.
Displays reminders and alerts for periodic maintenance.
Generates alerts for temperature extremes to prevent home damage.
Configure how and when your ecobee3 generates reminders and alerts.
Reminder for regularly scheduled maintenance, with options to set date, frequency, and turn on/off.
Configure time format (12/24 hr). Date/time programmed automatically from internet.
Configure thermostat to display temperature values in Fahrenheit or Celsius.
Enable Wi-Fi for internet connectivity, essential for features like Weather Forecast.
List of available networks; manually enter SSID if not visible.
Additional parameters for Static IP addressing: IP Address, Gateway, Subnet Mask, DNS.
Tools to diagnose Wi-Fi operation, ping gateway, ecobee.com, and IP address.
Register your ecobee3 at ecobee.com to access features and online energy management tools.
Update account, contact information, and location via the ecobee.com web portal.
Reconnect to internet and update location/house information when moving.
Reset registration to terminate association or reset thermostat to default.
Detects connected wires and displays them. Configuration is done on the thermostat.
Configure connected devices like Heat Pump, Furnace, Humidifier, Dehumidifier, Ventilator.
Configure heat pump stages, type, O/B reversing value, min cycle off time, and min outdoor temp.
Enables auto change-over as a system mode.
Min difference between heat/cool set temp for auto change-over. Default 5°F.
Enforces minimum compressor off time between cycles (240-900 seconds).
Wiring diagram for conventional heating and cooling systems.
Wiring diagram for heat-only systems.
Wiring diagram for systems with 2-stage heating and cooling.
Reference for icons displayed on the Home Screen (Menu, Weather, Quick Changes).
Reference for icons indicating system operation modes (Heat, Cool, Auto, Fan).
Reference for weather icons (Sunny, Mostly Sunny, Clear, Snow, N/A).
Reference for Wi-Fi connectivity status icons (Signal strength, connection status).
Lists main menu options like Registration, System, Sensors, Schedule, Settings.
Lists sensor-related menu options: Smart Home/Away, Follow Me, Your Thermostat.
Lists comfort setting options: Home, Away, Sleep, Custom.
To Next Page
