32
Boiler or Radiant System (2 stages) with Air Handler and
Conventional Cooling or Heat Pump
Do not jumper Rc or Rh, ecobee3 does this automatically.
R can go into either Rc or Rh terminals on your ecobee3.
Accessory devices
The ecobee3 can control an accessory HVAC device like a
humidifier, dehumidifier, or ventilation device from its ACC
terminals.
If the accessory is internally powered, connect the 24V to
ACC+. Also connect the common for the accessory to
common on the control board.
You will need to configure the accessory device when
you first power on your ecobee3.
PEK thermostat wiring
To Next Page
Loading...
