Ecobee 3 smarter wi-fi thermostat - Web Portal; Guided Setup Process; Step 1. Wiring Configuration; Step 2. Accessory Confirmation

5
Web Portal
Once registered (page 8), you can log in to your web portal
and manage your ecobee3 from your computer or tablet.
From the web portal, you can:
 Control current temperature and operation
 Adjust your schedule
 Set vacation periods
 View the weather forecast for your area
 Set thermostat preferences
 Manage all your ecobee thermostats
 Save energy with HomeIQ and insights
To access your customized web portal, visit ecobee.com and
click on the Login link.
To select a tile, touch or click on it. To close a tile and return
back to the main screen, touch or click (top-right corner).
Guided Setup Process
The Installation Guide that ships with your ecobee has the
necessary instructions to wire up and install your device. After
installing your ecobee3 thermostat on the wall and powering it
up, you will be guided through the first-run process. Complete
these steps to get it configured and connected online so you
can make use of all its smart features.
This will take you through the following steps:
 Wiring configuration and equipment configuration
 Setting your preferences
 Wi-Fi configuration
 Registering your ecobee3
If you make a mistake at any time or want to review a setting,
you can touch Back to display the previous screen.
Step 1. Wiring Configuration
Your ecobee3 automatically detects and displays which wires
are connected to it when it first powers on. It will warn you if
you’ve wired a configuration that it doesn't recognize.
If the reported connections are different than what you have
actually connected, call ecobee support for guidance.
Touch Next to continue.
Step 2. Accessory Confirmation
Your ecobee3 will ask if you have any accessories like
humidifier, dehumidifier, or ventilator connected to it.
Touch Yes if you have one of these devices; otherwise touch
No.
If you selected Yes, you will need to specify if the accessory is
internally powered:
 Touch Yes if your accessory is externally powered
(i.e. the ecobee3 does not provide power to it). This is the
case if there are connected to both ACC+ and ACC-.