EasyManua.ls Logo

Ecobee ecobee3 - Step 5: Connect Wires to Ecobee3; Wire Insertion and Securing; PEK R;Rc;Rh and Automatic Jumper

Ecobee ecobee3
44 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
21
Rotate sensor so bee points up
to the right.
5ft
(1.5m)
Warning! Do not place the remote sensor in direct
sunlight, near vents or window openings, or in enclosed
areas such as drawers, closed cabinets or closets as this
will distort the temperature readings.
Find a location
Place your remote sensor at a height of approx. 5ft / 1.5m
on an interior wall, away from direct heat/cool sources (eg.
fireplace, air vents, etc.) If the sensor is out of range of your
ecobee3 (approx. 45 ft / 13.7 m) the thermostat will show
N/A, meaning it cannot connect to the remote sensor. When
in range, they will automatically reconnect.

Other manuals for Ecobee ecobee3

Related product manuals