ECT Install and User Guide
Feb 2023
23 of 61
ECOER INC.
Manufacturer reserves the right to change specifications or designs without notice.
*
* *
*
*
*
*
*
*
*
* * *
PTC function (on some models)
In heating operation, for the units with electric heating
feature, press this button to activate electric heating
mode. When the PTC function is activated, the “ ”
mark appears.
NOTE: The electric auxiliary heating function of the AHU model is
switched by the MODE button , and the FUNC. button is a turbo function.
Follow me function indicator
Press the FUNC. button to select whether the room temperature is
detected at the indoor unit or the wire controller.
3. And then use Swing button to adjust the Up-Down airflow direction
of the selected louver.
Press the FUNC. button to scroll through operation functions
as followings:
[*]: Model dependent. If the indoor unit has no this function,
it will not display.
The select function icon will flash, then press the Confirm
button to confirm the setting.
Turbo function (on some models)
Under COOL/HEAT mode, press the FUNC. button to activate
the turbo function. Press the button again to deactivate the
turbo function. When the turbo function is activated, the
“ ” mark appears.
To Next Page
Loading...
