Ecoer ECT01 - Queries and Settings; Query Functions (Temp, Fan, Pressure)

ECT Install and User Guide
Feb 2023
45 of 61
ECOER INC.
Manufacturer reserves the right to change specifications or designs without notice.
When the air conditioning unit is off, into the query function of
temperature, press“ ”or “ ”to select AF, press “Confirm” into
test mode, press “Back” or press “ON/OFF” or press “Confirm”
drop out of test mode. In AF mode, 3~6 minutes test completion
automatically exits, if the test process, press “Back” or press
“ON/OFF” or press “Confirm” , the test exits will be interrupted.
When the air conditioning unit is off, into the query function of
temperature, press“ ” or “ ”to select SP, press “Confirm” to
adjust the static pressure value.
When the air conditioning unit is switch machine, Long press
“COPY” for 3 seconds , first display P:00, if connected to an indoor
unit, display P:00, if connected to multiple indoor units, press
“ ”or “ ”to display P:01, P:02, and then press “Confirm” to
enter the query indoor unit Tn(T1~T4) temperature and fan
fault(CF), press“ ”or “ ”to select.
15.Queries and settings
Not operating keys 15 seconds or press “Back” or press “ON/OFF”
drop out of query temperature.