ECT Install and User Guide
Feb 2023
3 of 61
ECOER INC.
Manufacturer reserves the right to change specifications or designs without notice.
No. Name Qty. Remarks
1
Wire controller
1
2
Installation and owner’s manual
1
3 Screws
3
M3.9*25 (For Mounting on the Wall)
4
Wall plugs
3
For Mounting on the Wall
5
Screws
2
M4X25 (For Mounting on switch box)
6
Plastic screw bars
2
For fixing on switch box
7 Battery
1
CR2032 3V
8
The connective wires group
1
Standard signal wires group
9
Screw 1
M4X8(For Mounting the connective wire group)
NOTE
• The specified cables shall be applied in the wiring. No external
force may be applied to the terminal. Otherwise, wire cut and
heating may occur and result in fire.
2. Installation accessory
Select the installation location
Don’t install at the place where cover with heavy oil, vapor or
sulfureted gas, otherwise, this product would be deformed that
would lead to system malfunction.
Preparation before installation
2.1 Please confirm that all the following parts you have been
supply.
To Next Page
Loading...
