To Next PageTo Next Page
Need help?Do you have a question about the Ecoflam MAX GAS 250 P and is the answer not in the manual?
General| Category | Burner |
|---|---|
| Model | MAX GAS 250 P |
| Thermal Output (Max) | 250 kW |
| Control | Electronic |
| Fuel Type | Natural Gas |
| Efficiency | 92% |
| NOx Emissions | Class 3 |
Provides technical specifications and data for the gas burners.
Guides on how to use and operate the gas burners.
Details technical specifications and data for the gas burners.
Specific operating guidance for authorized technical personnel.
Details the maximum and minimum output power of the burners.
Important safety instructions and precautions for burner operation and installation.
Details how the burner monitors flame presence and ionisation current.
Describes automatic shutdown procedures for flame loss or other faults.
How to lock and unlock the control unit using the reset button.
Step-by-step instructions for physically mounting the burner onto the boiler.
Regulations and guidelines for connecting gas lines and gas train.
Instructions for carrying out electrical connections by qualified personnel.
Procedure for measuring ionisation current for diagnostics.
Essential checks to perform before the initial start-up of the burner.
How to adjust the air damper to control burner output.
Procedure for adjusting the firing head for optimal combustion.
How to fine-tune combustion for efficiency and low emissions.
Instructions for adjusting the gas solenoid valve.
Procedure for calibrating the air pressure switch.
How to set the minimum gas pressure switch for correct operation.
Checks to perform after servicing or system downtime.
How to check and maintain optimal exhaust gas temperatures.
Lists various tasks for maintaining the burner's components.
General guidance on diagnosing and repairing common faults.
Links fault symbols and descriptions to their underlying causes.
Provides solutions and corrective actions for identified burner faults.
