Do you have a question about the Ecoflam MAX GAS 350 P AB and is the answer not in the manual?
Step-by-step procedure for initiating and testing the burner's operation.
Procedure for setting the initial gas flow rate for optimal ignition.
Diagrams and sequences for the LME21 and LME22 control boxes.
List of error codes, their corresponding LED blink patterns, and possible causes.
Instructions for adjusting the firing head and air intake for optimal combustion.
Method for verifying the functionality of the flame detection sensor.
Scheduled maintenance tasks to be performed annually on the burner.
Troubleshooting guide for common issues preventing the burner from starting.
Troubleshooting steps for when the burner starts but fails to ignite the flame.