EasyManua.ls Logo

EcoFlow DELTA Pro - Car Charging; Smart Extra Battery

EcoFlow DELTA Pro
123 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
10
EN
Smart Extra Battery
A single DELTA Pro can link with up to two Smart Extra Batteries at once for added capacity.
Refer to the user manuals of the Smart Extra Battery and Smart Generator for detailed
instructions.
111
000...
777
000
1. Turn off both the Smart Extra Battery
and DELTA Pro before connecting or
disconnecting them.
2. Before using, make sure both DELTA
Pro and Smart Extra Battery display
the extra battery icon on their screens.
3. Turn off the Smart Battery before
connecting or disconnecting it.
4. Do not touch the metal terminals of
the Smart Extra Battery connector.
If the metal terminals need to be
cleaned, gently wipe them with a dry
cloth.
Users can recharge the product through the Car Outlet. It supports 12V/24V car chargers and
an 8A default charging current.
Please charge using the car charger after you’ve started the car to avoid failure to start
due to insufcient car battery. In addition, please make sure that the cigarette lighter of
the Car Outlet and the Car Charger Input Cable are in good condition. EcoFlow takes no
responsibilities for any losses or damages caused by failures to follow instructions.
Car Charging
Car charging cable

Table of Contents

Other manuals for EcoFlow DELTA Pro

Related product manuals