14
External drainage: When the drain pipe is connected to the drainage outlet, press and hold
the speed button for 3 seconds, and LCD displays [External drainage indicator]. Press and
hold it again to turn off drainage function. If not turned off, the product will continue to drain
out when reaching high water level.
Wave 2 has drain-free function. When the cooling function is on, condensation evaporates
through ash distillation. When the heating function is in use or the ambient humidity is too
high, condensation cannot be drained completely using ash distillation. Check the water
level indication on the LCD for more information. When it cannot collect anymore water,
Wave 2 will shut down automatically (switch to fan function if it is currently in cooling mode.).
How to Drain
Low water level
→
High water level
→
Full
(Do not move or shake the product to avoid water leakage when reaching high water level
and above. Please drain the water before moving it.)
Manual drainage: A small amount of residual water will be left at the bottom of the water
tank after external drainage. Please remove the connecter, and tilt the unit back slightly until
the condensation is completely drained.
To Next Page
Loading...
Need help?
General
