7
Power On/Off
Charge Your Devices
Press the main power button once to turn on the product. The LCD screen lights up and
the main power indicator ashes white. Press and hold the main power button (for about 3
seconds) to turn off the product, and the LCD screen.
The USB-A and USB-C output ports are automatically turned on once the product is turned on.
Press the "DC output switch" or "AC output switch" once to turn on their corresponding DC/AC
output sockets; press again to turn them off.
When using the AC output socket, make sure that the sum power of all loaded devices
is less than the rated power.
DC ON/OFF AC ON/OFF
1. After the product is turned on, press the main power button once to turn off the
LCD screen.
2. If the product is not used for 5 minutes, it will enter hibernation and the LCD screen
will turn off.
3. When RIVER 2 is charging, it can't be turned off by pressing and holding the main
power button unless the charging cable is unplugged rst.
Short press the
power switch
Short press the
power switch
Short press for power-on/
Long press for power-off
To Next Page
Loading...
