9 Decommissioning, disassembly, environmental protection
Personnel:
n
Specialist
Protective equipment:
n
Chemical-resistant protective gloves
n
Protective eyewear
n
Safety shoes
DANGER!
Risk of injury due to the disregard of the specified personal protective
equipment (PPE)!
For all disassembly work, please respect the use of the PSA which is specified
on the product data sheet.
9.1 Decommissioning
To take the equipment out of operation, proceed as follows:
1. Before carrying out any subsequent work, switch off the electrical supply and secure
it against being switched on again.
2. Relieve line pressure in the dosing system.
3. Drain dosing medium completely from the suction lance
4. Thoroughly rinse the suction lance to remove chemical residues.
5. Remove the remaining processing materials and dispose of them in an
environmentally-friendly way
.
Decommissioning, disassembly, environmental protection
27 Rev. 1-10.2021
To Next Page
Loading...
