Ecom ECOM-D User Manual

Ecom-D Page 25
-(W.O.) Auto Connect: Automatic connection
(<F1> for YES / <F4> for NO)
-Channel: Input channel (1 – 13)
(selection after pressing <Enter>)
Connection with existing network:
-(Start/Stop WLAN: manual switching of WLAN connection
– available only with deactivated Auto Connect)
-Existing Network: available only with deactivated Access Point
-(W.O.) Auto Connect: Automatic connection
(<F1> for YES / <F4> for NO)
-Network scan: Search for available networks
(selection with <Enter>)
-WPA password: Input of password for the selected network
Pitot factor (selection after pressing <Enter>):
- Input of Pitot factor for flow rate calculation (standard = 0.93)
Printout (only instruments with printer)
(selection after pressing <Enter>):
- Text input for printout on measurement protocol (8 x 24 characters)
- Input the text of line 1 as follows:
1. Activate character selection list with <F4>.
2. Select keyboard type with <F3> (4 different keyboards available).
3. Use the arrow keys to select the desired character
(selected character is outlined by black background).
4. Confirm the selection by pressing <Enter>.
5. Repeat procedure until desired text is complete.
6. Once input for line 1 is completed, deactivate the character
selection mode with <F4> and move to the second line with the
arrow key <Down>.
7. Once all lines are complete, exit the menu
with <ESC>.

Ecom ECOM-D Specifications

General

Brand	Ecom
Model	ECOM-D
Category	Measuring Instruments
Language	English