Ecom j2kn pro - User Manual

Operating Instructions
WE PRODUCE QUALITY OF LIFE!

Summary

General Safety and Operational Hints

IR Bench Usage Precautions

Instrument Design Overview

Basic Module Components and Connections

Describes the basic module's ports, filters, printer, and connection sockets.

Control Module Details

Wireless Communication System

Data Storage and Multimedia Card Usage

Combustion Plant Data Management

Creating and Inputting Plant-Specific Data

Gas Measurement Operations

Performing Gas Analysis

Covers the procedure and display of gas analysis measurements.

CO Measurement for Gas Channel Safety

Oxygen (O2) Check Procedure

Optional Flow Measurement Guide

Describes how to perform flow rate measurements using a pitot tube.

Exhaust Draught Measurement

Soot and Oil Trace Measurement

Recording and Printing Measurement Data

Mean Value Measurement Function

Instrument Adjustments and Settings

Sensor Re-Calibration Procedure

Procedure to set new zero-points for the sensors.

Gas Concentration Unit Selection

Secondary Unit Configuration

Reference Oxygen (O2 ref) Input

Gas System Leakage Test

Performs a leakage test of the gas system.

Instrument Control and Status Monitoring

Data Processing and Management

Data Communication and Transfer

Explains data handling options via MM card and PC connection.

Automated Measurement Cycles

Data Logger Functionality

Data Logging with DASNT2 Software

Data Processing with DAS5 Software

Instrument Diagnostics and Fault Finding

Fault Diagnosis with ecom-AK

Guides on diagnosing faults by connecting to the ecom-AK unit.

Differential Temperature (dT) Measurement

Optional Heating System Efficiency Check

Evaluates heating plant performance and energetic quality.

Ecom j2kn pro Specifications