Ecom j2kn pro - Data Processing and Management; Data Communication and Transfer

Page 34 ecom-J2KN
pro
12. Data Processing
12.1. Communication
If a MM card is inserted in the slot, so it
will be used as record medium. The
menu „Data processing“ offers the
following functions:
Select:
For search or creation of plants files for measurement values as-
signment (compare chapter 7.).
View:
Recorded values to a selected plant can be viewed
(compare chapter 7.).
Memory (M):
Here all stored measurements (sorted
by record number) can be seen. Indi-
vidual measurement values can be
called as follows:
-Choose record number with the cursor
keys and confirm with <OK>
-Scroll with the cursor keys
-Leave record number with <ESC>
DRT <-> PC !:
Load data:
Enables the data import from e.g. rbr
software (available on our website
„www.rbr.de“). See chapter „Technical
Data“ for data format information
(please observe the transfer options of
your software!).
Select
View
Memory (M)
DRT <-> PC !
Format
Quit with:
Automatic measu.
Date Time Fuel type
1 01.09.06 11:01:24 Fuel oil
2 01.09.06 11:02:34 Fuel oil
3 01.09.06 11:04:20 Fuel oil
4 01.09.06 11:07:44 Fuel oil
5 01.09.06 11:11:25 Fuel oil
6 01.09.06 11:23:02 Fuel oil
7 01.09.06 11:44:09 Fuel oil
8 01.09.06 11:53:13 Fuel oil
9 01.09.06 11:59:59 Fuel oil
10 01.09.06 11:59:59 Fuel oil
Select: ↑↓
↑↓ ↑↓
↑↓
DRT
<
-
> PC !
Send dada
Load data
Quit with: