Ecom j2kn pro - General Safety and Operational Hints

ecom-J2KN
pro
Page 3
Important hints
The ecom
-
J2KN
pro
meets
the requirements of
DIN EN 50379 part of 2.
The
ecom
-
J2KN
pro
may
not be used for
continuous emission control!
Following minimum times must be kept, in order
to receive correct measured values:
-1 min. to calibrate the sensors at fresh air
-2 min. for stable measured values
The following substances impair the working of
the instrument:
-Cleaning agents
-Degreasers
-Wax polishes
-Adhesives
-Formaldehyde
Adjustments at burners and boilers
should be made
only by specialists, who are familiar with
this installations!
1. Charge the accumulator regularly (Charge not
used instrument min. once a month)!
2. Never store the instrument with unloaded
battery!