Ecom j2kn pro - 3 Power Supply

Page 8 ecom-J2KN
pro
3. Power supply
The basic module of the ecom-J2KN
pro
is delivered with internal
loading unit. The instrument can be operated upon a longer time
period with the internal accumulator (6 V; 7,2 Ah). Connecting the
internal charging unit to mains power is only compulsory to recharge
the accumulators and to operate the heated probe system.
The accumulators should be recharged when the instrument shows a
corresponding message (acoustical warning and display infor-
mation). The accumulators loading stand can be checked, looking at
the voltage information on the display (menu "Control"). The battery
warning is activated when the value „ACC.B“ is smaller than 6 V.
By 5,8 V the power operation via battery is no more possible. The
instrument must be further powered via internal charging unit.
The control module of the ecom-J2KN
pro
is powered by 3 nickel-
metal-hydride accumulators (type AA). In case of need, the accumu-
lators can be recharged by docking the control module to the basic
module.
Hereby 2 functions can be selected („Adjustments / „Internal“ /
„Reloading function“ / <OK>):
1. Recharging function ON (<F1> = YES):
- batteries slowly and carefully recharged
- recommended adjustment by frequent use
2. Recharging function OFF (<F4> = NO):
- batteries quickly recharged
- recommended adjustment by occasional use
Used accumulators c
an be returned to us or brought
to recycling stations of public waste disposal compa-
nies respectively accumulators selling stores!
Never use batteries, to operate the control
module of the J2KN
pro
!