5. Pedals:
•
Assemble both pedals to the bike by screwing them to the
Crank & pedals leg.!
!
!
!
!
!
!
!
!
!
Brake-sets adjustment
Make sure that the brake pads are not rubbing or locking the
front / rear disc, while you're not pressing the brake-levers.
•
In case in which the disc rubs / locked into the brake pads.
Release a bit both of the caliper screws (the screws that
connect the caliper to the fork), tightly press on the
brake - lever and re-screw back the screws into their
place while continuously pressing on the lever. !
!
!
!
!
!
!
!
!
!
To Next Page
Loading...