•
you can tune the braking power by tightening / releasing of
the small Helen screw which located between the brake
lever and the handlebar.
Handlebar height adjustment
•
Open the stem's top hoop lever, adjust the height of the
handlebar to the desired position and lock it back into its
place by re-closing the lever.
!
WARNING! Always check the brakes before using your bike,
make sure they are well operate.
WARNING! It is highly recommended that the brakes will be
tuned and maintained by professional bike store!
WARNING! In order to avoid damage to stem that can lead for a
sudden breaking, always make sure that the safety line that
marked on the handlebar’s tube is hidden from the eye while
locking it into its place.
To Next Page
Loading...