EasyManua.ls Logo

EcoMotion CORE Pro + eFAT - Routine Bike Maintenance

EcoMotion CORE Pro + eFAT
25 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
Be aware that the brake range of the bicycle may prolong
under certain circumstances (e.g. wet/moist surface, sand,
etc.)
Do not ride your bike in water ,puddles, rain, streams, etc.,
never immerse the bike in water, as the electrical system may
get damaged.
Learn all relevant state laws as well all traffic regulations prior
to riding your bike and comply them.
Always start your ride by pedaling and in low PAS level. In
this way you’ll control better the bike.
Assist the motor by pedaling in uphill climbs
!
Bike maintenance:
Do not oiled the battery or the motor.
Oil the bike chain and the metal parts (which are not
aluminum) on a regular basis. The frequency of oiling your
bike parts should be more frequent in a humid / wet areas.
Use only original parts. Do not use substitutes parts unless
they permitted by Ecomotion Bike. please consult with us
about substitutes parts at contact@ecomotionbikes.com.
Using substitutes parts without consulting may void warranty.
The bike should be cleaned using a moist rag only, DO NOT
pour / spray water directly onto the bike. After cleaning the
bike, all metal parts, should be oiled.
All of bikes moving components and all bearings, should be
cleaned on a regular basis.
The Bike's brakes and their pads needs to be inspected in
bicycle store on a regular basis.
EcoMotion Bikes
22