Ecotech A Series User Manual

EC9830 CO ANALYZER OPERATION MANUAL
4-28 98307600 Rev. C-1
Figure 4-6. Remote Terminal
4.6.2.2 Ending a Remote Terminal mode session
Controlling the analyzer by remote terminal automatically sets the analyzer to
Remote mode.
NOTE: It is advisable that the user always returns
the analyzer to Command mode at the end of the
remote terminal session, so that other users may
download data.
To end the remote terminal session:
1. Set the Interface Mode option on the Interface Menu to Command. For
detailed instructions on how to do this see section 4.6.2.3.
2. Terminate the connection by selecting the Stop option on the Comm menu.
4.6.2.3 Setting the analyzer to Command mode during a Remote
Terminal session
1. Click exit repeatedly to display the analyzer’s start-up window. Main Menu
should be highlighted.
2. Click enter to enter the Main Menu.
3. Click up or down until Interface Menu is highlighted.
4. Click enter to enter the Interface Menu.
5. Click up or down until Interface Mode is highlighted.

Ecotech A Series Specifications

General

Brand	Ecotech
Model	A Series
Category	Measuring Instruments
Language	English