CLHCABLELAYER–NT60PROFESSIONALCABLELAYER
Dear Customer, thank you for having chosen this ECOTECH ITALIA product. We are certain that this machine will fully
meet you usage requirements. In order to obtain optimal performance from your cable layer, as well as to ensure its
proper maintenance over time, be sure to read all of the indications and warnings contai
ned within this manual. This
manualmustbepreservedandmustalwaysremainwiththemachi
neforthedurationofitsworkinglife.
READTHEUSERINSTRUCTIONSCAREFULLYBEFORESTARTINGTHEMACHINE!
GENERALACCIDENTPREVENTIONREGULATIONS
Alwaysuseextremecautionwhenoperatingthemachine.
Thisusermanualmustbereadcarefullybeforeusingthemachineforanyworkoperations.
Various safety labels can be found upon the machine: these are not decorative elements! They serve to continuously
remind the operator of the damage and injuries which can result from improper machine use. Always pa
y special
attentio
ntothehazardsandwarningsindicatedbythem.
Thismachineisequippedwithanextremelysharp,rotating,steelcutter.
KEEPYOURHANDSANDFEETATASAFEDISTANCEFROMTHISCUTTINGDEVICE!!!
Ifthemachineissoldortransferredtoathirdpartyforanyreason,thepartyinquestionmustbeinformedoftheabove
accidentpreventionregulationsandmustbeprovidedwiththemachine’suserinstructions.
Beforebeginningan
yworko
perations,makesurethattheterrainwithintheoperatingareadoesnotcontainanyobjects
whichcouldbeprojectedbythemachine.Suchobjectscouldposeaserioushazardtoanyoneinthevicinity.
Keep people, animals and foreignobjects at least 15 metres away from the machinewhile it is in f
unc
tion. In order to
avoidbeingstruckbyanyprojectedobjects,theoperatormustwear:APROTECTIVEVISOR,COVERALLS,SAFETYSHOES,
GLOVESANDAPROTECTIVECAP.
Neverperformmaintenanceuponthemachinewhilethemotorisrunning.
THEMOTORMUSTALWAYSBESHUTOFFBEFOREPERFORMINGANYINTERVENTIONS.
Donottamperwithordeactivatethemachine’ssafetydevices.
Theoperatorshallalwaysbearfullresponsibilityforanyinjuriesordamagecausedtoth
irdpar
ties.
The improper use of  the machine on behalf of the operator shall void the machine’s warranty  and shall exonerate the
manufacturerofanyresponsibility.
If any machine malfunctions are encountered during work operations, contact your reseller’s service centre for
assistance.NEVER ATTEMPTTOREPAIRTHEMACHINEONYOUROWN.INEXPERI
ENC
EDREPAIR OPERATIONSCANLEAD
TOMORESERIOUSDAMAGE.
Alwaysuseoriginalsparepartswhichhavebeensuppliedbythemanufacturer.
1‐  Fuelcap
2‐  Motorstarterhandle
3‐  Gasthrottle
4‐  Cutteractivationregulator
5‐  Advancementregulator
6‐  Cutteractivationlever
7‐  Handlebarswing‐actioncontrollever
8‐
  Swing‐ac
tioncon
trolregulator
9‐  Advancementactivationlever
10‐  Cablespool
11‐  Motoroilcap
Fig.1