UAV engine EFI installation manual-DLE120-V1.4
Copy right ECOTRONS LLC http://www.ecotrons.com
Built-in COM port (9-pin) RS232 cable
The default baud rate is 115200, which the fastest of the serial comm. rate of the PC. It is
not supposed to change.
4.2 USB communication mode
4.3 CAN communication mode
Our custom ECU support the CAN communication, if the ECU of EFI system supports the
CAN communication, you can use this communication mode to connect ECU.
You need to choose the CAN device Type, Baud Rate, after finishing setting, then click
“Open Device” to open the CAN device.
To Next Page