ECOVACS DEEBOT N10 - Page 13

13
EN
3. Operating and Programming/3.3 Charging DEEBOT
>0.5m (1.64')
>1.5m (4.92')
>0.5m (1.64')
1
Docking Station Placement
3
Charge DEEBOT
2
Power ON
Note: I = ON, O = OFF.
DEEBOT cannot be charged when being powered OFF.
Empty remaining water from the Reservoir and remove the Reservoir
and the mopping pad plate before charging DEEBOT.
ashes when DEEBOT is charging. goes out when DEEBOT is
fully charged.
* You can also purchase an Auto-Empty Station that automatically
empties your DEEBOT's dustbin. Explore more accessories at
www.ecovacs.com/global.
6.5h