ECOVACS DEEBOT OZMO 960 - Page 15

15
EN
Note: When DEEBOT completes the cleaning cycle or when the battery gets low, DEEBOT automatically returns to the Docking Station to recharge
itself. DEEBOT can also be sent back to the Docking Station at any time by using the ECOVACS App or by pressing the AUTO Button on the robot
for 3 seconds.
Empty remaining water from the Reservoir and remove the Reservoir and the Cleaning Cloth Plate before charging DEEBOT.
6
Charge DEEBOT
Note: I = ON, O = OFF.
3. Operating and Programming
4
Install Side Brushes
5
Power ON