16
EN
3. Operating and Programming
7
Start
Note: The robot’s Control Panel stops glowing after the robot is paused
for a few minutes. Press the AUTO Mode Button on DEEBOT to wake
up the robot.
9
Power OFF
Note: When DEEBOT is not working, it is recommended to keep it
switched ON and charging.
8
Pause
Note: The robot’s Control Panel stops glowing after the robot is paused
for a few minutes. Press the AUTO Mode Button on DEEBOT to wake
up the robot.
If DEEBOT is paused for more than 90 minutes, DEEBOT starts a new
cleaning cycle after being woken up.
To Next Page
Loading...
