EasyManua.ls Logo

ECOVACS DEEBOT T30S - Page 8

ECOVACS DEEBOT T30S
89 pages
Print Icon
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Loading...
8EN
GROUNDING INSTRUCTIONS
This appliance must be grounded� If it should malfunction or
breakdown, grounding provides a path of least resistance
for electric current to reduce the risk of electric shock� This
appliance is equipped with a cord having an equipment-
grounding conductor and grounding plug� The plug must be
inserted into an appropriate outlet that is properly installed and
grounded in accordance with all local codes and ordinances�
WARNING – Improper connection of the equipment-
grounding conductor can result in a risk of electric shock�
Check with a qualied electrician or service person if you
are in doubt as to whether the outlet is properly grounded�
Do not modify the plug provided with the appliance – if
it will not t the outlet, have a proper outlet installed by a
qualied electrician�
This appliance is for use on a nominal 120 V circuit and has a
grounding attachment plug that looks like the plug illustrated
as the following photo� Make sure that the appliance is
connected to an outlet having the same conguration as the
plug� No adaptor should be used with this appliance�
GROUNDING PIN
GROUNDED
OUTLET
Device Update
Typically, some devices are updated bi-monthly, but not
always so specic�
Some devices, especially those that went on sale more
than three years ago, will only be updated if a critical
vulnerability is found and xed�
For INDOOR household use ONLY
This device contains licence-exempt transmitter(s)/
receiver(s) that comply with Innovation, Science and
Economic Development Canada’s licence-exempt
RSS(s)� Operation is subject to the following two
conditions:
(1) This device may not cause interference�
(2) This device must accept any interference, including
interference that may cause undesired operation of the
device�
To satisfy FCC&ICRF exposure requirements, a
separation distance of 20 cm or more should be
maintained between the antenna of this device and
persons during device operation�
To ensure compliance, operations at closer than this
distance is not recommended�

Related product manuals