16
EN
3. Operating WINBOT
7
Start Cleaning
1
Step
Warning: When using WINBOT to clean windows, the Safety Pod must be used to guarantee the safe operation of WINBOT.
6
Prepare the Safety Pod
1
Step
2
Step
2
Step
Make sure to use the Finishing Cloth to clean the Safety Pod bottom.
Use a dry cloth to clean an area on the glass where the Safety Pod
is to be attached.
Press the Safety Pod rmly on the glass until the Safety Pod
Status Indicator Light glows a continuous GREEN.
Note: Turn the jack plug clockwise towards until it locks.
To Next Page
Loading...
