Need help?Do you have a question about the ECOVACS WINBOT W2 and is the answer not in the manual?
General| Type | Window Cleaning Robot |
|---|---|
| Battery Type | Lithium-ion |
| App Compatibility | ECOVACS HOME App |
| Safety Features | Safety Rope |
| Compatible Surface | Glass |
| Control Method | App, Remote Control |
| Connectivity | Wi-Fi |
Appliance usage by individuals with reduced physical, sensory, or mental capabilities requires supervision.
Avoid operating and charging the appliance in extreme temperatures or high humidity.
Clean exterior windows only when tethered, with calm winds, and no rain or snow.
Securely attach the safety tether to a strong railing using the Carabiner before use.
Never leave the appliance unattended during operation to prevent injury or damage.
Do not use in gale storms, force-10 winds, or above 2000 meters altitude.
Ensure the appliance is plugged in; a safety battery provides backup.
Do not leave the appliance unattended even when it is plugged in.
For household use only, not for commercial or industrial environments.
Avoid using on broken, uneven, or gapped glass to prevent falling.
Only use accessories and the power adapter recommended or supplied by the manufacturer.
Verify that your power supply voltage matches the voltage marked on the Power Adapter.
Do not use on framed glass with a frame smaller than 5 mm (0.2 in).
Do not use on glass less than 3 mm or mirrors less than 4 mm thick.
Do not use on glass or mirrors with a handle height of 70-105 mm.
Do not use the appliance on greasy windows.
Cleaning performance may be affected in high humidity environments.
Store the appliance away from heat and flammable materials.
Do not use on exterior windows in rainy weather to avoid damage or falling.
Do not use if the appliance does not attach firmly or shows visible damage.
Do not immerse in water or place where it can fall into a tub or sink.
Do not touch the power plug with wet hands.
Keep the appliance and power adapter away from fire and liquid during charging.
Handle the power cord carefully; do not pull, carry, or place heavy objects on it.
Do not use with a damaged cord or if the appliance is not working properly.
If the supply cord is damaged, it must be replaced by the manufacturer or service agent.
Remove the plug from the receptacle before cleaning; do not unplug by pulling the cord.
The safety battery must be replaced by the manufacturer or service agent.
Remove and discard the safety battery according to local laws and regulations before disposal.
Disconnect the appliance from the receptacle before removing the battery for disposal.
Dispose of used batteries according to local laws and regulations.
Do not incinerate the appliance; the battery can explode in a fire.
Use the appliance according to this manual; the company is not liable for improper use.
WARNING: Only use the detachable supply unit GM130-2400525-2D for recharging.
The robot contains batteries that are only replaceable by skilled persons.
The plug and Power Adapter must be used indoors.
If the vacuum glass is leaking, remove WINBOT immediately after cleaning.
Inspect the area for small particles before cleaning; remove them to avoid scratching.
Clean the Mopping Pad to remove particles and prevent glass scratching.
Add ECOVACS WINBOT cleaning solution to the Water Tank, maximum 60ml.
Wet and wring out the Wiping Pad, then align it on the velcro at the bottom of WINBOT.
Connect the Compound Cable, Power Adapter, and Plug. Ensure full charge (approx. 4 hours).
Tie the Safety Rope to a stable, immovable object and lock the carabiner.
Long press START to begin fan operation, then place WINBOT on the window to auto-attach and clean.
WINBOT returns to the starting spot. Long press START to stop the fan, then remove according to prompts.
To Next Page